Model 8h red
The flywheel meat slicer model 8h built in the period between 1928 and 1947 in 3 different versions. This meat slicer takes approximately forms of the meat slicer Berkel model 7, but is improved in many details. Starting from the protection applied on the left guide of sliding of the driver of round form to the coverage of the worm screw with the end of the stroke plate with recall and range of 15 slice tiknesses at will from 0,25 mm. ( .010 inch ) minimum to 4 mm. ( .160 inch ) maximum, or the machine produced in Argentina from 0,5 mm. ( .020 inch ) minimum to 8 mm. ( .320 inch ) maximum. The sliding of the driver on the side right it takes place within the guide where was created a groove. Berkel model 8h take a blade of 370 mm. and has a sharpener very similar to the Slicer Berkel model 7. The Slicing Machine Berkel model 8h working by a flywheel closed with an external diameter of 360 mm. where is applied inside the decal with the description "Van Berkel's Patent". The metal parts are originally plated in chrome. The slicer Berkel Mod.8h was originally painted in red, black and ivory The Slicer Berkel Model 8h needs a support of 250 mm. Front - 250 mm. Rear - 460 mm. length having a total size of 660 mm. height - 870 mm. in length - 715 mm. in width. The meat Slicer Berkel model 8h has a net weight of 101 kgs. The slicer was supplied without any supporting support, but optionally at the request of the buyer his original pedestal was supplied, where the slicer could be correctly positioned in every point of the room without creating impediments on the work and be cleaned more easily and be enhanced even more. This slicer, like all the flywheel slicers that have been restored and sold by The World's Best Slicers, is restored exclusively with the exclusive use of original antique decals respecting the color tone and supplied with its original pedestal, avoiding trivial copies.